Drivers.com

follow us:

facebook twitter

Resolve AMD RADEON 7850 errors

By on

Solution for AMD Graphics Card Error Code 43

Windows generates Error Code 43 whenever it finds problem with any installed hardware, such as your graphics card. The error may not be displayed on the screen but you will experience problems with display when your graphics card is not working properly. In some scenarios, Windows will load its own driver for Display Adapters. A look at Device Manger will give you more information about Error Code 43.

  1. Go to Start > Control Panel
  2. Go to “Hardware and Sound”
  3. Under Device and Printers, click “Device Manager”
  4. In Device Manager, click “+” to expand Display Adapters. You will see an entry for AMD RADEON 7850 graphics card and a yellow exclamation mark near the device name.
  5. Right-click on the device to view its Properties.
  6. In the General Tab,  you will see an error message which says “Windows has stopped the device because it has reported problems (Code 43)”

There can be several reasons for this error, including incorrect settings, over clocking issues or corrupt/ missing Drivers. Sometimes changing the graphics card settings to maximum values causes the system to generate Error Code 43.  Change the graphic card settings to factory defaults.  Resetting the graphics card will resolve the issues that have propped up due to wrong settings or changing default settings. Follow the steps given below to reset the graphics card to factory defaults

  1. Launch AMD Catalyst Control Center
  2. Click on Preferences menu
  3. Restore Factory Defaults
  4. When a warning message is displayed, click Yes
  5. Click OK
  6. Restart the system

If the error code 43 still persists, you may be required to update drivers. A better option is to uninstall all AMD drivers and install latest drivers for AMD RADEON 7850. You should use AMD Catalyst Install Manager (CIM) to perform a clean uninstall of all AMD Drivers. Do not use Windows Add/Remove programs to uninstall AMD software as leftover entries can cause other problems.

Steps to completely uninstall AMD drivers from your Windows system

  1. Click on Start -> Control Panel
  2. Select “Programs and Features”
  3. Select “ATI Catalyst Install Manager”
  4. Click on “Change”
  5. Click on “Next” on screen which says “Welcome to the InstallShield Wizard for ATI Catalyst™ Install Manager”
  6. Select “Express Uninstall All ATI Software”
  7. Follow on-screen instructions to complete the process
  8. Click on Finish
  9. Restart the system

Once you have uninstalled all AMD drivers and software, you need to download latest drivers for AMD RADEON 7850 from AMD website.  If you prefer to use an automated option download our recommended Driver Update Tool and run a free driver scan for your AMD RADEON 7850 graphics card.

Solution to Canon Pixma MX340 printer errors

By on

You have an urgent print job lined up, but the Canon MX340 goes dead the moment you issue the print command. Sound familiar? Then the following guide will help, it outlines effective solutions to common printing issues.

Canon Pixma – common errors and fixes

Solution for Printing does not start issue

There can be several reasons for the printer not starting a job. The primary step in resolving it is to check the physical connections, such as power and USB connection.

Follow the steps given below to check the physical connections.

Step 1- Checking Printer Connections

Ensure the printer is on and receiving power. Next check the connection between your multi-function device and computer.

If you have connected your printer to the USB hub, remove it and directly connect it to the USB port in your computer. If the USB cable shows signs of wear and tear, you must get a new one.

Step 2 – Setting Canon Pixma MX340 as default printer

If you are giving the print command from your computer, ensure Canon Pixma MX340 is your default printer. Follow the steps given below to make Canon Pixma MX340 your default printer.

  1. Click Start
  2. Click Devices and Printers in Start Menu
  3. You should see Canon Pixma MX340 listed in the Printer and Faxes device list. Right-click Canon Pixma MX340 and select “Set as Default printer”
  4. You should see a checkmark near “Canon Pixma MX340” which signifies the computer has set the multi-function device as your default printer.

Step 3 – Setting right printing port

  1. Click Start
  2. Click Devices and Printers in Start Menu.
  3. Under Printer and Faxes, right-click Canon Pixma MX340.
  4. Click Printer Properties. The Canon Pixma MX340 properties dialog box opens
  5. Click Ports.
  6. In the list of ports look for the port named USBnnn (where n is a number).
  7. You should see a check mark in the box besides USBnnn and your printer name in the Printer field in the list. (The printer name is displayed as CNBJNP_xxxxxxxxxx where xxxx is a number)
  8. Click Apply -> Ok

If the printer does not print even after you’ve set the right port, you will be required to uninstall printer drivers and install again.

  1.  Go to Start -> Control Panel
  2. Go to Hardware and Sound
  3. Under Device and Printers, click “Device Manager”
  4. Click “+” sign to expand Universal Serial Bus Controllers”
  5. Right-click on Printer in the list and select “Update Driver”
  6. The Update Driver Wizard will be initiated by Windows, follow the steps given below to update drivers
  7. Click “Browse my computer for driver software.”
  8. Scroll down the list in drop-box and select “Let me pick from a list of device drivers on my computer”
  9. Click “Have Disk”
  10. Click “Browse” and navigate to the folder where drivers are located.
  11. Click “Ok”

If you do not have Driver CD, click here to download our recommended Driver Update Tool and run a free driver scan for your Canon Pixma MX340 drivers (click the download button at the top of the page).

Fix PCI Simple Communications Controller Driver XP Errors

By on

For PCI Driver Download & Updates, click here

PCI Driver Errors

A PCI Simple Communications Controller Driver XP Error is an indication that a peripheral device attached to the PCI slot in your computer is not working properly.

The system may not display a message telling you about the PCI Simple Communication Controller Driver XP Error but may display a message that points towards a problem with the device attached to the PCI slot.

Below are a few PCI Simple Communications Controller errors and simple ways to resolve them.

Solution for Error Code 28 – PCI Simple Communications Controller

If the device in the PCI slot has stopped working, you can find out more about the problem by looking at the PCI Devices in the Device Manager window.

You may see a yellow exclamation mark near the PCI simple communications controller icon. The error is generated by the system because of a broken path of the Driver file.

To resolve the issue, you will be required to manually update the PCI Simple Communications Controller Driver by following the steps below:

  • Click on Start -> Control Panel -> System
  • Go to Hardware Tab and click on Device Manager
  • Under “Other Devices”, right- click on “PCI Simple Communications Controller” and select Properties
  • Click on Driver Tab
  • Click on Update Driver and follow the instructions

Note: You are provided with two options – “Search automatically for the Driver software” or “Browse your computer for Driver software”
If you have a motherboard CD, insert it in the CD tray and let the system install the required PCI Simple Communications Controller driver automatically.

Solution to Error – “The device is not configured properly. (Code 1). There is no driver selected for the device information set or element.”

This error is generally related to PCI-E Ethernet NIC Driver which prevents your system from connecting to the Internet. Corrupt or missing drivers are the most common cause for this error.

Follow the steps below to fix this issue

  • Click on Start -> Control Panel -> System
  • Go to Hardware Tab and click Device Manager
  • Go to Network Adapters and right-click Ethernet and go to properties
  • Go to Driver Tab and click Driver Details
  • In Driver Files Details window, you can see the Driver files with a red or green check in front of the Driver file.
  • Close the window and go to Ethernet and uninstall the device.
  • Go to Network Adapters, right-click it and select “Scan for hardware changes”

Your system will look for devices that do not have Drivers installed. Insert the motherboard CD or Device Driver CD and let the system install the Drivers for the PCI Ethernet Controller.

Automatically update drivers

Automatic driver update tools offer many benefits, the most important ones being:

  • You can update device drivers automatically
  • The software scans and updates all outdated or missing drivers at one go
  • The tool picks the right drivers for your device and operating system, so you won’t have to worry about installing an incorrect driver by mistake
  • Automatic driver updates are 100% safe

Driver Updater is one of the best driver update tools out there. Outbyte Driver Updater will give you access to a database of over 1 million drivers. It will regularly scan your PC, suggesting new driver versions to install. Driver Updater contains drivers for a variety of Windows devices. With just one click, you can update drivers in your system.

Step 1
Click here to Install and launch the app

Step 2
Scan all devices

Step 3
Install or update drivers automatically

 

Start Download